Ward Mfg 2.NML Pipe 90 deg Elbow, 2 in, FNPT, 150 lb, Malleable Iron, Galvanized, Domestic
Ward Mfg 2.NML Pipe 90 deg Elbow, 2 in, FNPT, 150 lb, Malleable Iron, Galvanized, Domestic $33.60
Back to products
3/4 in, XH Sch. 80, Black Carbon Steel Pipe, Plain End, A53, Grade A, Type F, Butt Weld
3/4 in, XH Sch. 80, Black Carbon Steel Pipe, Plain End, A53, Grade A, Type F, Butt Weld $11.20
Click to enlarge

Watson McDaniel UC450 – ¾” NPT

QUICK-CHANGE CONNECTOR
* ¾” NPT Connections
* Pressures To: Trap Module Dependent
* Temperatures To: Trap Module Dependent
* Easily Maintained-Universal two bolt swivel mounting simplifies removal from system
* Simple Installation – SST Mounting Block mounts permanently into system.
* Rugged – Handles water hammer and superheat.
* All Stainless Steel Construction – Resists both internal and external corrosion.

$136.15

Compare
Add to wishlist

Guaranteed Safe Checkout

Features & Compatibility

QUICK-CHANGE CONNECTOR
* ¾” NPT Connections
* Pressures To: Trap Module Dependent
* Temperatures To: Trap Module Dependent
* Easily Maintained-Universal two bolt swivel mounting simplifies removal from system
* Simple Installation – SST Mounting Block mounts permanently into system.
* Rugged – Handles water hammer and superheat.
* All Stainless Steel Construction – Resists both internal and external corrosion.

SHOW MORE

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Watson McDaniel UC450 – ¾” NPT”

Your email address will not be published. Required fields are marked *

Related Products

Compare
Quick view
Add to wishlist

ARMSTRONG 811 INVERTED BUCKET STEAM TRAP

,
$240.95
Add to cart
The Armstrong series 811 inverted bucket steam trap is an economical solution for steam process equipment. Best suited for high pressure drip locations and laundry equipment, after initial prime air and condensate is vented from the orifice after condensate accumulation causes the bucket to fall. All Armstrong inverted bucket steam traps are repairable for even bigger operational savings. The series 811 is suitable for pressure ratings up to 250 PSI and condensate flows up to 1,050 lbs/hr.
  • Trap has a 5" face to face dimension
  • Available in sizes 1/2", 3/4", and 1"
  • Available in pressure ratings 15 PSI, 30 PSI, 70 PSI, 125 PSI, 200 PSI, 250 PSI
Compare
Quick view
Add to wishlist

ARMSTRONG 812 INVERTED BUCKET STEAM TRAP WITH INTERNAL CHECK VALVE

,
$593.95
Add to cart
The Armstrong series 812 inverted bucket steam trap with internal check valve is an economical solution for steam process equipment. Best suited for high pressure drip locations and laundry equipment, after initial prime air and condensate is vented from the orifice after condensate accumulation causes the bucket to fall. All Armstrong inverted bucket steam traps are repairable for even bigger operational savings. The series 812 is suitable for pressure ratings up to 250 PSI and condensate flows up to 2,150 lbs/hr.
  • Trap has a 6-1/2" face to face dimension
  • Available in sizes 1/2", and 3/4"
  • Available in pressure ratings 15 PSI, 30 PSI, 70 PSI, 125 PSI, 200 PSI, 250 PSI
  • Optional internal check valve to address sudden drops in steam supply pressure and to address back pressure in the condensate return line
Compare
Quick view
Add to wishlist

ARMSTRONG 813 INVERTED BUCKET STEAM TRAP WITH THERMIC VENT

,
$788.95
Add to cart
The Armstrong series 813 inverted bucket steam trap with thermic vent is an economical solution for steam process equipment. Best suited for high pressure drip locations and laundry equipment, after initial prime air and condensate is vented from the orifice after condensate accumulation causes the bucket to fall. All Armstrong inverted bucket steam traps are repairable for even bigger operational savings. The series 813 is suitable for pressure ratings up to 250 PSI and condensate flows up to 4,400 lbs/hr.
  • Trap has a 7-3/4" face to face dimension
  • Available in sizes 3/4" and 1"
  • Available in pressure ratings 15 PSI, 30 PSI, 60 PSI, 80 PSI, 125 PSI, 180 PSI, 250 PSI
  • Optional thermic vent for quicker venting of air and reduced warm-up time
Compare
Quick view
Add to wishlist

Durabla 8369 SS Check Valve 1″

,
$124.67
Add to cart
SS Check Valve 1"
Compare
Quick view
Add to wishlist

WATSON MCDANIEL TD600SB SERIES THERMODYNAMIC STEAM TRAP WITH INTEGRAL STRAINER & BLOWDOWN VALVE

,
$363.95
Add to cart
The Watson McDaniel TD600SB series thermodynamic steam trap with integral strainer and blowdown valve discharges condensate very near to steam temperature and is unaffected by waterhammer or superheated steam. Best suited for steam tracing lines, superheated steam, and outdoor installation subject to freezing along with other high pressure applications. The TD600SB is suitable for pressure ratings up to 600 PSI and condensate flows up to 3,140 lbs/hr. Trap is manufactured entirely of stainless steel "L" model contains a reduced discharge orifice for improved performance, longevity, and trap efficiency. Optional blowdown valve to protect strainer from contamination Trap can be installed in the vertical position for "freeze-proof" installation Available in sizes 1/2", 3/4", and 1"
Compare
Quick view
Add to wishlist

WATSON MCDANIEL UTD450SM UNIVERSAL THERMODYNAMIC STEAM TRAP

,
$316.95
Add to cart
The Watson McDaniel UTD450SM universal style "quick-change" trap module is designed for pairing with a universal trap connector and can be used wherever thermodynamic steam traps are applied. The UTD450SM universal steam trap is fastened to a trap connector or station and can be removed with a standard open-end or socket wrench without disturbing existing piping. Capacities up to 1,603 lbs/hr, pressures up to 450 PSIG. Can be installed in any orientation. Interchangeable with TLV FP32 and FL32, Spirax/Sarco UTD52H and UTD52L, Nicholson UMT-TD10 and UMT-TD10L, and Armstrong CD-3300 Maximum allowable operating pressure of 450 PSIG All stainless steel trap construction and internals, includes mounting hardware