Flat Expanded Metal, 3/4″ width to short way of diamond, No. 9 (0.1495″) thick, 60″ x 120″. Carbon Steel. Stocked in Dallas only.
Expanded Metal Flat, 3/4 in, No. 9, 5×10
Flat Expanded Metal, 3/4″ width to short way of diamond, No. 9 (0.1495″) thick, 60″ x 120″. Carbon Steel. Stocked in Dallas only.
$48.62
Guaranteed Safe Checkout
Features & Compatibility
Customer Reviews
Related Products
ARMSTRONG 811 INVERTED BUCKET STEAM TRAP WITH THERMIC VENT
$313.95
The Armstrong series 811 inverted bucket steam trap with thermic vent is an economical solution for steam process equipment. Best suited for high pressure drip locations and laundry equipment, after initial prime air and condensate is vented from the orifice after condensate accumulation causes the bucket to fall. All Armstrong inverted bucket steam traps are repairable for even bigger operational savings.
The series 811 is suitable for pressure ratings up to 250 PSI and condensate flows up to 1,050 lbs/hr.
- Trap has a 5" face to face dimension
- Available in sizes 1/2", 3/4", and 1"
- Available in pressure ratings 15 PSI, 30 PSI, 70 PSI, 125 PSI, 200 PSI, 250 PSI
- Optional thermic vent for quicker venting of air and reduced warm-up time
ARMSTRONG 812 INVERTED BUCKET STEAM TRAP WITH THERMIC VENT
$529.95
The Armstrong series 812 inverted bucket steam trap with thermic vent is an economical solution for steam process equipment. Best suited for high pressure drip locations and laundry equipment, after initial prime air and condensate is vented from the orifice after condensate accumulation causes the bucket to fall. All Armstrong inverted bucket steam traps are repairable for even bigger operational savings.
The series 812 is suitable for pressure ratings up to 250 PSI and condensate flows up to 2,150 lbs/hr.
- Trap has a 6-1/2" face to face dimension
- Available in sizes 1/2", and 3/4"
- Available in pressure ratings 15 PSI, 30 PSI, 70 PSI, 125 PSI, 200 PSI, 250 PSI
- Optional thermic vent for quicker venting of air and reduced warm-up time
ARMSTRONG 812 INVERTED BUCKET STEAM TRAP WITH THERMIC VENT AND INTERNAL CHECK VALVE
$644.95
The Armstrong series 812 inverted bucket steam trap with thermic vent and internal check valve is an economical solution for steam process equipment. Best suited for high pressure drip locations and laundry equipment, after initial prime air and condensate is vented from the orifice after condensate accumulation causes the bucket to fall. All Armstrong inverted bucket steam traps are repairable for even bigger operational savings.
The series 812 is suitable for pressure ratings up to 250 PSI and condensate flows up to 2,150 lbs/hr.
- Trap has a 6-1/2" face to face dimension
- Available in sizes 1/2", and 3/4"
- Available in pressure ratings 15 PSI, 30 PSI, 70 PSI, 125 PSI, 200 PSI, 250 PSI
- Optional thermic vent for quicker venting of air and reduced warm-up time
- Optional internal check valve to address sudden drops in steam supply pressure and to address back pressure in the condensate return line
Honeywell, Inc. V8944B1019 1 inch Diaphragm Gas Valve, 24 Vac
$124.67
• Designed for replacement for V4844/V8844 Gas Valves.
• Suitable for use on atmospheric boilers, commercial water heaters, and rooftop heaters.
• V4944/V8944B,C,L,N models are solenoid-operated diaphragm valves that combine the functions of safety shutoff and pressure regulation in a single unit.
• V4944/V8944B,N are for use with natural gas.
• V4944/V8944C,L are for use with LP gas.
• Valve body of die-cast aluminum with a straight-through pattern.
• V4944 are used with line voltage, dual-stage controllers; V8944 are used with 24 Vac dual-stage thermostats or controllers.
• Valve closes on power failure; recommended for final shutoff service.1 inch Diaphragm Gas Valve, 24 Vac
Reviews
There are no reviews yet.