Ward Mfg 2.NML Pipe 90 deg Elbow, 2 in, FNPT, 150 lb, Malleable Iron, Galvanized, Domestic $33.60
Back to products
3/4 in, XH Sch. 80, Black Carbon Steel Pipe, Plain End, A53, Grade A, Type F, Butt Weld $11.20
Click to enlarge

WATSON MCDANIEL TD900S SERIES THERMODYNAMIC STEAM TRAP WITH INTEGRAL STRAINER

The Watson McDaniel TD900S series thermodynamic steam trap with integral strainer discharges condensate very near to steam temperature and is unaffected by waterhammer or superheated steam. Best suited for steam tracing lines, superheated steam, and outdoor installation subject to freezing along with other high pressure applications. These traps are fully in-line repairable and can be installed in the vertical or horizontal position.

The TD900S is suitable for pressure ratings up to 900 PSI and condensate flows up to 968 lbs/hr.

Trap internals are entirely manufactured of stainless steel
“L” model contains a reduced discharge orifice for improved performance, longevity, and trap efficiency. Recommended for operating pressures over 150 PSIG.
Suitable for 842 F maximum allowable working temperature for superheated steam.
Available in sizes 1/2″, 3/4″, and 1″

$859.95

Compare
Add to wishlist

Guaranteed Safe Checkout

Features & Compatibility

The Watson McDaniel TD900S series thermodynamic steam trap with integral strainer discharges condensate very near to steam temperature and is unaffected by waterhammer or superheated steam. Best suited for steam tracing lines, superheated steam, and outdoor installation subject to freezing along with other high pressure applications. These traps are fully in-line repairable and can be installed in the vertical or horizontal position.

The TD900S is suitable for pressure ratings up to 900 PSI and condensate flows up to 968 lbs/hr.

Trap internals are entirely manufactured of stainless steel
“L” model contains a reduced discharge orifice for improved performance, longevity, and trap efficiency. Recommended for operating pressures over 150 PSIG.
Suitable for 842 F maximum allowable working temperature for superheated steam.
Available in sizes 1/2″, 3/4″, and 1″

SHOW MORE

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “WATSON MCDANIEL TD900S SERIES THERMODYNAMIC STEAM TRAP WITH INTEGRAL STRAINER”

Your email address will not be published. Required fields are marked *

Related Products

Compare
Quick view
Add to wishlist

ARMSTRONG 811 INVERTED BUCKET STEAM TRAP

,
$240.95
Add to cart
The Armstrong series 811 inverted bucket steam trap is an economical solution for steam process equipment. Best suited for high pressure drip locations and laundry equipment, after initial prime air and condensate is vented from the orifice after condensate accumulation causes the bucket to fall. All Armstrong inverted bucket steam traps are repairable for even bigger operational savings. The series 811 is suitable for pressure ratings up to 250 PSI and condensate flows up to 1,050 lbs/hr.
  • Trap has a 5" face to face dimension
  • Available in sizes 1/2", 3/4", and 1"
  • Available in pressure ratings 15 PSI, 30 PSI, 70 PSI, 125 PSI, 200 PSI, 250 PSI
Compare
Quick view
Add to wishlist

ARMSTRONG 812 INVERTED BUCKET STEAM TRAP WITH INTERNAL CHECK VALVE

,
$593.95
Add to cart
The Armstrong series 812 inverted bucket steam trap with internal check valve is an economical solution for steam process equipment. Best suited for high pressure drip locations and laundry equipment, after initial prime air and condensate is vented from the orifice after condensate accumulation causes the bucket to fall. All Armstrong inverted bucket steam traps are repairable for even bigger operational savings. The series 812 is suitable for pressure ratings up to 250 PSI and condensate flows up to 2,150 lbs/hr.
  • Trap has a 6-1/2" face to face dimension
  • Available in sizes 1/2", and 3/4"
  • Available in pressure ratings 15 PSI, 30 PSI, 70 PSI, 125 PSI, 200 PSI, 250 PSI
  • Optional internal check valve to address sudden drops in steam supply pressure and to address back pressure in the condensate return line
Compare
Quick view
Add to wishlist

ARMSTRONG 813 INVERTED BUCKET STEAM TRAP WITH THERMIC VENT

,
$788.95
Add to cart
The Armstrong series 813 inverted bucket steam trap with thermic vent is an economical solution for steam process equipment. Best suited for high pressure drip locations and laundry equipment, after initial prime air and condensate is vented from the orifice after condensate accumulation causes the bucket to fall. All Armstrong inverted bucket steam traps are repairable for even bigger operational savings. The series 813 is suitable for pressure ratings up to 250 PSI and condensate flows up to 4,400 lbs/hr.
  • Trap has a 7-3/4" face to face dimension
  • Available in sizes 3/4" and 1"
  • Available in pressure ratings 15 PSI, 30 PSI, 60 PSI, 80 PSI, 125 PSI, 180 PSI, 250 PSI
  • Optional thermic vent for quicker venting of air and reduced warm-up time
Compare
Quick view
Add to wishlist

Durabla 8368 SS Check Valve 3/4″

,
$124.67
Add to cart
SS Check Valve 3/4"
Compare
Quick view
Add to wishlist

Durabla 8369 SS Check Valve 1″

,
$124.67
Add to cart
SS Check Valve 1"
Compare
Quick view
Add to wishlist

Watson McDaniel IB Series Inverted Bucket Steam Trap 1″ 180#

,
$588.50
Add to cart
* Rugged, inexpensive and in-line repairable Watson McDaniel Cast Iron Inverted Bucket Steam Traps * Hardened stainless steel valve and seat provides maximum corrosion resistance which extends the steam trap’s service life * Stainless steel bucket is designed to minimize the effects of water hammer * Another outstanding feature of the Inverted Bucket Steam Trap is our easy-to-install PCA (Pressure Change Assembly) kit which allows the user to change the steam trap’s pressure to accommodate a wider range of applications. * PCA kits can be installed in other brands of inverted bucket steam traps at a fraction of the cost. * Inverted Bucket Steam Traps are available in sizes ½” thru 1” NPT, for pressures to 250 PSIG and temperatures to 450ْF in both horizontal and vertical configurations.